Thursday 17 December 2015

Seasons Greetings



Well another year over and lots of Happy Customers .

Like to send emails to everyone wishing them all the best for Christmas and the New Year and its nice to read the replies , here is a few

 
 
 
Thanks Terry,
 
Getting the floor painted has been a huge step forward for us. A job we have been wanting done for quite some time. We are delighted to find you and have a good professional job carried out. It’s not easy getting here never mind working  for a prolonged period so were pleased you accepted the work with enthusiasm.
 
All the best for Xmas and 2016!
 
 
Regards,
Roy
 
 
Thank you young man. Hope you have a good festive break and manage to get some sun.
 
All the best
 
Kind Regards
Jim Palmer
Production Manager
 
Thanks Terry the same to you too.
Floor coating is brilliant appreciate effort you and your lads put in.
Will be in touch in the New Year
 
Same to you Terry and thanks for all your good work over the year
 
Mark Nurse, MCIPS Purchasing Manager
 
 
Terry
Thanks, have a good one.
Cheers
Lawrie
 
 

Saturday 12 December 2015

Refurbishment of Old Worn Floor

Refurbishment of Old Worn Floor

 
 
Our client asked us to refurbish there existing production unit floor. The floor was showing signs of age and had suffered UV damage over the years. We removed all contaminants from the surface by diamond grinding, before the application of Solvent Free high Build Epoxy coating and demarcation lines for each production path.
 
 
Before we started.

 
 

The Finished Refurbishment

 
 






To find a full range of our products and services please visit our website on the following link:
 
 
or contact us on the following email:
 


Copyright Floor Painters Limited 2015. All Rights Reserved.

Tuesday 27 October 2015

White Polyurethane Coating to Caravan Site Photography Area

White Polyurethane Coating to Caravan Site Photography Area

 
Our client needed the floor to their photography area to renovated. They required an easy clean, hardwearing and most importantly non marking to ensure the quality of there photography.
 
We installed two coats of Polyurethane coating to achieve this.
 
Before we started:
The floor before we started was marked and peeling.

 The preparation:
 
We removed the old floor coating by diamond grinding to achieve a smooth, clean and keyed surface ready for the floor coating.
 



Installation:

Once the preparation was complete we installed two coats of Polyurethane Coating.



 

The Finished product ready to be handed back to our client.

 
 
 

Wednesday 30 September 2015

Fleet Support Service Garage Floor Improvements

 

 Fleet Support Service Garage Floor Improvements

 
We were asked by our client to improve there fleet service garage to create a clean and safe environment for the workforce working on the vehicles. In one weekend we removed all the oil and contaminants from the concrete slab and installed a hard wearing epoxy floor coating with pedestrian walkway and safety demarcations. 
 

 
 
 
 
 

 
 

Sunday 27 September 2015

Warehouse loading dock improvements

 

Warehouse loading dock improvements - 3 doorways

We were asked by one of our clients to install 3 slip resistant areas around their loading docks.
 
Stage 1 Firstly we had to remove the old coating around the doorways which had worn out. This was done with diamond floor grinders which removed the old coating and produced the required keyed surface for the new system.
Before
After preparation


 

Stage 2      
 
Once the preparation was complete a primer coat of solvent free epoxy coating was applied to which a full broadcast of aggregate was applied.
Primer coat
Full aggregate broadcast


 
 
 Stage 3
 
A final top coat of solvent free epoxy coating was applied to seal the aggregate and achieve the slip resistant loading pads.
 
Finished loading pad
 

To find a full range of our products and services please visit our website on the following link:
 
 
or contact us on the following email:
 

Floor Repairs and coating to Marine equipment test facility

Installation of slip resistant walkway and floor coating to Marine Test Facility

 
Our client needed there workshop floor to be improved for Health and safety, as well as cosmetic appearance. They only had a small window of opportunity for these works to be carried out, and asked us to complete the project for them.
 
The floor was first prepared using enclosed shot blasting to remove and debris and contaminants from the surface.
 
Once this was complete all repairs where carried out using epoxy resin repair.
 
All walkways were installed using MMA with a full broadcast of aggregate, before the remaining areas where coated using solvent free epoxy coating.
 
 

Before


 After

 

 


To find a full range of our products and service please visit our website on the following link: www.floorpainters.co.uk or contact us on the following email: darren@floorpainters.co.uk

Monday 24 August 2015

workshop area caravan site






area one of four to complete caravan site

Watch us transform this room into a clean and hygienic working environment   




















Old coating is removed by industrial grinding










Filling in holes to enhance final finish








Application of first coat