Wednesday 30 September 2015

Fleet Support Service Garage Floor Improvements

 

 Fleet Support Service Garage Floor Improvements

 
We were asked by our client to improve there fleet service garage to create a clean and safe environment for the workforce working on the vehicles. In one weekend we removed all the oil and contaminants from the concrete slab and installed a hard wearing epoxy floor coating with pedestrian walkway and safety demarcations. 
 

 
 
 
 
 

 
 

Sunday 27 September 2015

Warehouse loading dock improvements

 

Warehouse loading dock improvements - 3 doorways

We were asked by one of our clients to install 3 slip resistant areas around their loading docks.
 
Stage 1 Firstly we had to remove the old coating around the doorways which had worn out. This was done with diamond floor grinders which removed the old coating and produced the required keyed surface for the new system.
Before
After preparation


 

Stage 2      
 
Once the preparation was complete a primer coat of solvent free epoxy coating was applied to which a full broadcast of aggregate was applied.
Primer coat
Full aggregate broadcast


 
 
 Stage 3
 
A final top coat of solvent free epoxy coating was applied to seal the aggregate and achieve the slip resistant loading pads.
 
Finished loading pad
 

To find a full range of our products and services please visit our website on the following link:
 
 
or contact us on the following email:
 

Floor Repairs and coating to Marine equipment test facility

Installation of slip resistant walkway and floor coating to Marine Test Facility

 
Our client needed there workshop floor to be improved for Health and safety, as well as cosmetic appearance. They only had a small window of opportunity for these works to be carried out, and asked us to complete the project for them.
 
The floor was first prepared using enclosed shot blasting to remove and debris and contaminants from the surface.
 
Once this was complete all repairs where carried out using epoxy resin repair.
 
All walkways were installed using MMA with a full broadcast of aggregate, before the remaining areas where coated using solvent free epoxy coating.
 
 

Before


 After

 

 


To find a full range of our products and service please visit our website on the following link: www.floorpainters.co.uk or contact us on the following email: darren@floorpainters.co.uk